Supply and fixing of 12.mm thk gypsum boards to G.I framing in perfect level. Necessary offset and grooves to be provided at the junction of ceiling & walls/columns/partitions etc. to include additional pelmets made out of ply at the junction of windows glazing. Cutouts for light fittings, A/C grills etc. including providing & fixing necessary G.I / wooden frame supports for the above fixtures & additional suspenders to hang the same independently. G.I. frames to consist of proprietary supplied frames & as per manufacturers recommendations suspended from dash fasteners anchored to structural slab by means of G.I. angles. Gypsum board fixed with proprietary supplied fixing devices & finished. The joints between the sheets of plaster board are to be covered with jointing paper tape and flushed with UB 888 (all-purpose jointing compound) to provide a smooth durable and professional finish. Suspension points & clips shall be able to take a minimum safe load of 50kgs. Including making grooves at the junction of ceiling& walls/columns/partitions etc.Cutouts of light fixtures, A/C grills etc., to be left wherever necessary. The ceiling profile shall be as per drawings. The rate shall be inclusive of preparing the surface, providing and applying 2 coats of proper putty, primer and super fine paint, roller applied plastic emulsion paint of approved color as per details. All complete including return air slits etc. & A/C boxing wherever indicated. Rate should be inclusive of masking for fixtures & wooden frames.Note : area less than 12” in width shall be measured in Rft.
Explore More Products